Sam Woo...Ernst Pott...F.L.Smithe...Champlain....Mark Andy....Sanjo..Kolbus..Color King..Halm..Goss..Nebiola..Hantscho..Kluge..Rotoprint..Rapida..Planeta..Western Gear..Davidson..Didde..Bobst..Goebel..Iijima..Rotogravure..Web Presses
Planeta
PL65A, 6 color 64 inch plus Dahlgren coater and ext
del. 1983, Dahlgren damps, perfector
never used, Pierry dryer, Under power, avail end of 08, need deposit
now. Price negotiate VGC. PIC
Item #1265
Contact Terry
Smith,(704)385-9222, Fax (704)385-8203, email
atozprintequipmt@aol.com
Planeta
55" 6 color with coater, 1987 Planeta
Polygraph V77, 3381920 hrs, Epic coater, no ext del, Fuji III console
with remote inking, 4 Epic damps and 2 Vari damps, 2 Royce RR,
Ternes, 2 air knives, Delivery has been disabled, NEED
OFFERS Possible parts machine Terry Smith 704-385-9222
PIC
Item #1265
Contact Terry
Smith,(704)385-9222, Fax (704)385-8203, email
atozprintequipmt@aol.com
Planeta
5 color 50 inch, 1985, Varimat, Model
P56 A3, console w/remote register, Epic damps, Baldwin blanket
washers, Ink agitators, Ternes, Graphix PS, non stop feed and del.,
Raised 18", 23000 hrs, under power. Call Terry PIC
Item #1255
Contact Terry
Smith,(704)385-9222, Fax (704)385-8203, email
atozprintequipmt@aol.com
Planeta 2
color 50", 1986, Varimat, Model V26A
SW1, Fuji console w remote register, Varidamp damps, Baldwin blanket
washers, Oxy dry ink agitators, Ternes clamp, OxyDry PS, raised 18
in, Non stop feeder and del, 20,788 hrs. Under power. Call
Terry Smith 704-385-9222 PIC
Item #1253
Contact Terry
Smith,(704)385-9222, Fax (704)385-8203, email
atozprintequipmt@aol.com
Planeta
6 color 40 inch with coater and extended
delivery, 1990, 33489 hrs, Herbert
sheet cleaner, DC drive, cont feed and del., Varidamp, Fuji console,
Dahlgren coater, IR dryer, Weko spray, Royce RR, 460 v, can print
test. Avail NOW, Price $167,000 Call Terry Smith 704-385-9222
PIC
Item #1208
Contact Terry
Smith,(704)385-9222, Fax (704)385-8203, email
atozprintequipmt@aol.com
Planeta
V58 SW2, 44 x 64, 1988, four color with
coater,
Vari control console,
Varimat damps, RR, Blanket washers, IR dryer, 21516 hrs. or approx:
129 mil imps, under power, avail Sept 08, Must see to believe, need
deposit now!!! Price $199,000 Call Terry Smith
704-385-9222
PIC
Item #1207
Contact Terry
Smith,(704)385-9222, Fax (704)385-8203, email
atozprintequipmt@aol.com
Bobst
SP 1600 E, 1974, Embossing diecutter,
previously used primarily for embossing, includes one die chase, one
embossing chase, one stripping frame. Under power available for
demo. Excellent condition Price $115,000 PIC
Item #467
Contact Terry
Smith,(704)385-9222, Fax (704)385-8203, email
atozprintequipmt@aol.com
Bobst
1080 Die Cutter, 1957, Max size 30 1/4"
X 42 1/2" . Price $17,500 obo Needs clutch
PIC
Item #1136
Contact Terry Smith, A
to Z Equipment Sales, Phone (704)
385-9222
Hantscho
Mark II web press, 1966, cutoff 23 3/4"
x 38", 2 units plus count-o-veyor stacker, primarily used for
financial printing. Under power in Southeast US. Asking
$25,000 obo call Terry Smith 704-385-9222 PIC
PICItem
#1135
Contact Terry Smith, A
to Z Equipment Sales, Phone (704)
385-9222
Looking
for green model Kluge machines (guarded
as well as unguarded) for inventory. Models we buy/sell include
MD,ND,EHD,EHE,WFD,WFE. We are always looking for inkers as well as
foil stampers and we will make you a fair offer if you are looking to
sell or purchase a used machine. We will buy machines in ANY
condition. Even if your press is locked up, in parts condition, or
has simply seen better days. You can email pictures and info to
Mathew at DandMmachinery@comcast.net, or call at (616) 260-2574.
Contact: Mathew Hutchins,
D & M Machinery, 2350 Breton industrial Park Dr, Kentwood,
Michigan 49508, Phone: (616)260-2574
Flexotecnica
TACHYS FNC 3000 + 1UV station,
1998, 39.4" width, 9 color (8 around CL
and 1 stack unit with UV) speed up to 650 fpm, unwinder and
rewinder. Email for complete specs and pics.
PIC
Item #1132
Contact Terry Smith, A
to Z Equipment Sales, Phone (704)
385-9222
Comco
Commander model 1210, 1995, 10
inch, only 13,000 hrs, 7 color with coater, back side print on
first head, CCI vision system and huge amount of tooling and cutting
dies, roll to roll or sheet. Call Terry Smith
704-385-9222 Price $375,000 obo. PIC Item
#1131
Contact Terry Smith, A
to Z Equipment Sales, Phone (704)
385-9222
Complete
Printing Facility for Sale. Click
Here for Details
Didde
8 unit Super Web combo press Approx
1994, (4 units Didde and 4 units super web), 24 inch cutoff, 4 UV
lamps, Butler data mat splicer, Didde sheeter, QTI silicone
applicator/static eliminator, turnbar, low hours, completely rebuilt
1999, Not under power Item
#1127
Contact Terry Smith, A
to Z Equipment Sales, Phone (704)
385-9222
2004
Sam Woo Rotogravure press, 4 color.
This press is currently installed and under power but has never seen
ink. The press was never used as we went with a flexo press instead.
It is priced to move at $25,000 USD. No reasonable offer will be
refused. Visit our Web Site @ www.pacificequipment.com
Item #1101
We will dismatal and load on a truck for this price. Contact Ryan Anderson #1-604-240-2597 or ryan@pacificequipment.com for inquiries.
Contact: Ryan Anderson,
Ry-Coll Industries Inc., 19926 - 37A Avenue, Langley, BC, Canada V3A
2S7, Phone: ( 604) 530 -0636, Email
ryan@pacificequipment.com
Goss
Surburban S918. SOLD
Older machine. Still under power.
Prints good quality in color & B/W. 5 Unit, 2 High, 5 Reel Stand,
1 folder with a quarter folder. 2 rolls of Paper. Asking $50,000 or
best offer Make offer Item
#1069
Contact Terry Smith, A
to Z Equipment Sales, Phone (704)
385-9222
1978
Didde Conserver, 4 units,
14x17", turn bar, cutoff
17", score and perf. Unit. Standard water system. Model C2-173-Z. S/n
280-131. $14,000.00
OBO US or best offer.
Item #1003
Contact: Ray Delgado,
Paragon Printing Machinery International, 5617 Whitman Ave, Fort
Worth,TX 76133, Company Phone Number: 817-292-5736, email address:
paragon2printmac@sbcglobal.net
Halm
Jet 2-Color JP-TWOD-SOLD
P with Royce s/n 3154RC bought from Halm reconditioned in 1996.
In the last ten years press has less than 50 million impressions.
Press is still on the floor and running. Price $20,000.
Item #1002
1990
RZ-7 Planeta, ser # 283---, 7 color,
SOLD
Rapidac coater, Epic dampeners,
installed on all units in 1997, max sheet size 38" x 50", Hours
44,106, Weko pow spray, Planeta console with touch key pads for ink
adjustments lateral and circumferal register, VariDry drying,
extended delivery, no perfectors. very nice Call Terry Smith
704-385-9222 Item
#1001
Contact Terry Smith, A
to Z Equipment Sales, Phone (704)
385-9222
Ernst
Pott Blanker Press
#473-55. $1,500.00 FOB Alb.
Item #994
Contact Ella Leeper, Desert
Paper & Envelope Co., Inc., 2700 Girard NE, Albuquerque, New
Mexico 87107, Phone: 505-884-0640,
F.L.
Smithe RH #37 with 1/1 aniline printing.
Needs parts which are
available from F.L. Smithe. $500.00 Item
#993 FOB Alb.
ContactElla Leeper, Desert
Paper & Envelope Co., Inc., 2700 Girard NE, Albuquerque, New
Mexico 87107, Phone: 505-884-0640,
Didde
Tandemer 6 color, 13.5
inch wide, 8.5" and 17" cutoff, under power east coast, Approx early
80's machine, runs good can be seen running. Printer lost contract
and needs to sell. Item
#991
Contact Terry Smith, A
to Z Equipment Sales, Phone (704)
385-9222
Flexo
Press Aquaflex
SOLD
1 color (may be expandable) approx: 1996, model LCXP 1001, 48
original hrs., 10 " web and 1/8" gearing, Includes: Unwinder, web
guides, infrared and forced air dryer, diecutting and slitting, roll
handling boom, 3 precision diecut label dies, Price $24,500.
Also available is a Nordstrom bulk hot melt at additional
cost. All under power and avail for demo in Western US
Item #971
Contact Terry Smith, A
to Z Equipment Sales, Phone (704)
385-9222
KLUGE
EHD #146XXX WITH 3 PULL FOIL AND
ACCESSORIES, US$16000.00 LOADED Item
#530
HEIDELBERG
GTP FOIL PRESS #67063 US#26000.00
OBO
MULLER
MARTINI 246 PONY PERFECT BINDER US$18000.00
Contact Printers
Services: Mike Fowlds,1710 E Kent, VANCOUVER,
VANCOUVER,B.C. V5P 2S7, V3X 2Z5, Phone 1 604 597 7442, email address:
mfowlds@direct.ca
Kolbus-Freccia
Hard Case line: Kolbus
smashing unit + outfeed FM405 1988, Kolbus
spine gluing & drying RB93 1988, Kolbus
nipping unit+outfeed FN75 1988, Wohlenberg
three knife trimmer 44FM50 1988 VG, Freccia
rounding & backing M540 1984 with outfeed, Freccia
triple liner M541 1984 with outfeed, Kolbus
casing in machine EMP-40 1984, Kolbus
forming machine FE354 1974 Refurbished 2000, OutFeed
Conveyor + Box sealer
This equipment has been fully maintained by two full time engineers. It is inthe best condition of any mid eighties line anywhere in the world. We have a video and an independent engineer's report. Total for line = USD$ 290 ,000 Item #498 PIC
Contact
PRESSNET: 39 Glen
Nevis St. Mansfield, Brisbane, Australia, 4122, Phone +61412 720 060,
Contact Charles Scandrett, Email
pressnet@selfportrait.com.au
DIDDE
VIP- 8 color web offset press model 205-872: SOLD
Year 7-7-89, hours 11,789, web width 20.5", print width 20", gear
pitch 1/6", 40" diameter unwind roll, 3" air core shaft, top and
bottom web cleaner (vacuum type), controlled infeed unit, 8 wet
offset printing units, UV dryers water cooled Spectral, punching
unit, video inspection system, sheeting unit, rewind unit, call or
email for complete specs or more photos,
Contact Terry Smith,
AtoZ Equipment Sales, Phone (704)
385-9222
Halm
Envelope Press: 4 color
1988, overhauled by Halm in 1998, $68,000.00
Sterling
Item #369
AD3 Envelope Company:
143 Kirkstall Road, Leeds, United Kingdom LS3 1JL, Phone 44 0 113
2443700, Contact Andrew Martin, Email
ad3envelope@hotmail.com
Rotogravure
Printing Press:
Magnet Five station 32"
wide -15HP main drive with dual unwind and rewind stations - - all
print stations re-built-26" 5 roll vertical calendar film pre-treat
station with sterico temperature control systems -- WSI
pressure/vacuum film cleaner system-Hurletron Altair registration
system-gas fired film drying ovens -- CO2 flame suppression
system-complete with ink pump stations-stainless steel cleaning
tanks-cylinder carts and cylinder hoists - -1,000? cylinder bases
with supporting pallet racks(cylinder bases alone could be in
$800,000 to $900,000 range.) Previously used for paper and modified
for film with unique film cleaning systems. Call for price and
questions. Need to sell!!
Item #346
Contact Terry Smith,
AtoZ Equipment Sales, Phone (704)
385-9222
Didde
VIP 20 1/2": 1994,
8-color variable size web offset press, Very low hours, KTI splicer,
infeed, web guide, variable print units, (8) 25" print inserts,
variable plate bender, center drive, (3) GEW UV stations, processing
section w/ 25" magnetic die-cut cylinder, Console, PressTek auto
register control, variable sheeter w/stacker, excellent condition,
Email for price, Item
#335
Web Offset Group: Phone
(916) 774-7510, Contact Gordon Caulkins, Email
webpresssales@aol.com
Hantscho
Hurricane Web Offset: 1966,
Heatset, 6 color, 22 3/4"x36", 6 units w/turn bars, prints 133-150
line screens, Quad cut off control, semi-auto console register
control, 4 chill units, Butler splicer and infeed, Hantscho
sheeter/folder with plow fold, WPC web guides, much more, can be seen
running, excellent condition, photos available. Midwest USA Location
Item #334
Contact Equipment Plus:
P.O. box 1800. Broken Arrow, OK, 74013-1800, (918)451-3023,
Fax(918)449-0557
Contact G.B Thorton
GT1800@aol.com
Iijima
Autoplaten: 1970
26"x38", Located in Canada, $50,000.00 USD Item
#321
Lee Graphic
Equipment:
3400 14th unit #21,
Markham, Canada, L3R OH7, Phone (416) 727-3886, Contact Aurthur
Lee
Goebel
520 Varicolor: 1985,
Butler spicer, in feed w/web guide, 4 24" print towers w/Weko
dampeners, glue unit, MEG gas drier and chill stand, moisture unit
w/EL register system, main file hole and sprocket station, second
perf station, folder w/table, QA perf cylinder, non stop turret
rewind w/hover pads and Techscan video, operators console, truck for
inserts, chad and trim extractor. Item
#307
World Wide Press: 60
Sandway, Beech Hill, Lancs, England WN6 7SF, Phone +44(0)1942 233357,
Contact Frank Fazackerley, Email frank@world-wide-press.co.uk
Check
Printing Equipment: Pack
to Pack, System w/ press, encoder, collator, used, located in
Washington, $26,000.00 Item
#216
Contact Ron, ASR Inc.
Vancouver Washington, Phone (503)
543-3032
Nebiolo
Die cutter 1976: 23"x32"
Italian made, totally rebuilt in 1999, $23,000.00 Canadian, Located
in Canada Item
#182
Contact Arthur Lee, Lee
Graphic Equipment, 3400 14th unit #21, Markham, Canada, L3R OH7,
Phone (416)
22"x
26" Western Gear Rotary Press: Item
#125 3 offset towers,
Dahlgren Dampeners, 1 marginal & numbering tower, 2 shafts for
file holes,1 line hole shaft, 2 cross perf cylinders. Press in
California, Asking $40,000.00
Contact Ted Wilcox
Phone(775)329-0817 Fax (877)255-0238.