|



Bindery and
Finishing
We have added an On-line
Lease Application. So get
Pre-approved then purchase that piece of equipment your
company needs to grow and stay competitive! You won't beat
the rates
ABDick
9810, AB Dick 9810 with T-head,
Env Feeder/catcher, Baumfolder 714, Single head drill, 2
phase - 5 hole drill, paper jogger, shrink wrap machine
w/header, camera (plate maker), paper plate punch, paddy
wagon, 10 sheet collater, light table, executive viewing
station, 25 drawer plate holder, Laser Jet 5000 copier for
plates, wide assortment of paper/env, ink - wide assortment,
pallet jack. Basically an entire shop less a cutter for
$15,000
Contact Rock Solid
Printing: 303 Wilshire Court, Glenn Heights, TX 75154,
Phone: 972-953-6453, Contact: Lisa Neill, Email
derrickneill1@yahoo.com
Saddlebinder/Bookletmaker,
8 pocket Pulux/Vijuk (similar
to Muller 321)8 pocket with cover feeder and two hand feed
stations, HEAVY DUTY, comes with 4th and 5th knife
attachment for 3 knife trimmer, 2006 model installed new in
2007, low volume machine, still under power. Photos
available. Very low hours 5,400 Item
#527
Contact Terry
Smith,(704)385-9222, Fax (704)385-8203, email
atozprintequipmt@aol.com
GBC
APC Ultra Punch model EE AP2, serial
number 40839, good condition, shipping weight 300 lbs,
punches 40,000 and up sheets per hour, max punch length 12"
Price $5,900. Call Terry Smith 704-385-9222 PIC
Item
#526
Contact Terry
Smith,(704)385-9222, Fax (704)385-8203, email
atozprintequipmt@aol.com
BAUM
FOLDER 726B 4/4/4 CONTINUOUS 40"
ORIGINALY
PURCHASED FROM A BOOK PUBLISHER IN NORTHERN CALIFORNIA. RAN
GREAT UNTIL WE DECIDED TO CHANGE THE PLUGS FOR THE NEW AND
IMPROVED PLUGS. IT NEEDS AN ELECTRICIAN TO FINISH THE
PROJECT. THE FOLDER IS BEING SOLD AS IS WHERE IS. PRICED AT
$ 2,000.00 Item
#525
Contact: John
Pendergast
,
J & J
Marketing Inc. 2545 chnadler Ave. #26, Las Vegas, Nevada
89119, Phone:
702-739-0338
Sergeant
shrink wrap semi auto 220,
20" x 14" seal area, tunnel
measurements 18"W x 9"H x 20"L, mounted on frame with
casters. Excellent condition. Appears to have had very
little use. Call Terry Smith 704-385-9222 PIC
Item
#524
Contact Terry
Smith,(704)385-9222, Fax (704)385-8203, email
atozprintequipmt@aol.com
Custom
fabricated sheet-fed 8 steel-to-steel rotary die cutting
station with pressure equalizer.
11 repeat. Key components:Pick & Placer - Thiele Model
20-08 Dual Slide Plate Reciprocation Placer, Die Station -
ADT/Kocker + Beck 8" steel-to-steel rotary die,
Pressure Equalizer - ADT/Kocker + Beck, Vacuum - KUFO model
UFO-101, Controller - Siemens, Cutting Speed - 3,600 piece
per hour, The unit is set up as a sheet-fed die cutter, but
can be modified to be fed with roll stock. Different gearing
could increase or decrease the 11 repeat as it is now
configured. Condition - All components are in very good
condition. Needs re-calibrating to run properly. Will deduct
tune up cost from purchase price. Cost new - $41,000, Asking
- - $12 500 Item
#523
Contact KAMA, INC:
3831 FENWAY CROSSING, MARIETTA, GA 30062, Phone:
770-578-1754, Contact: MIKE
MICHAUD
Horizon
BQ 440 Perfect Binder with 3 knife
trimmer,1999, with Trimstar
110, BQ binding line with transfer to 3 Knife--no stacker.
Price BQ 440 $14,000, Trimstar 110 $19,000 Package price for
both $31,000 L.O.T Call Terry Smith 704-385-9222
PICItem
#522
Contact Terry
Smith,(704)385-9222, Fax (704)385-8203, email
atozprintequipmt@aol.com
Bourg
BB3001 single clamp perfect binder.
Produces document from flat sheet or signatures up to 500
per hour. Max sheet 12.5" x 15 1/8". Max book thickness up
to 450 sheets Call for pricing Terry Smith 704-385-9222
Item
#521
Contact Terry
Smith,(704)385-9222, Fax (704)385-8203, email
atozprintequipmt@aol.com
Stahl
BL-200 case line, 1987, CAC
setup, 45,000 hrs, Hard cover bookline under power for demo.
Call for pricing. PIC
Item
#520
Contact Terry
Smith,(704)385-9222, Fax (704)385-8203, email
atozprintequipmt@aol.com
1999
Rosback Perfect Binder
with Extra Glue Pot in good running condition. $5,500,
Duplo DBM 100
Booklet Maker,
works very well. $2,600, Martin
- Yale Folder
$500, Sunrise
Thermographer
$1,700 Item
#519
Contact Rod
Church, LithoTech: 100 US Hwy., Andrews University
Harrigan Hall, Berrien Springs, MI 49104, Phone 269
471-6513
Duplo
System 5000 booklet maker, (2)
10 bin collating towers, System 5000 trimmer, Year 2004,
Click count 368,423, rear stacker, Came from inplant shop,
like new, Price $65,000. Call Terry Smith 704-385-9222
PIC
Item
#518
Contact Terry
Smith,(704)385-9222, Fax (704)385-8203, email
atozprintequipmt@aol.com
Polar
92 ED Year 2000, Installed
new in 2002, Under power, ground level, coming from smaller
shop. Ser# 70113xx, Call Terry Smith 704-385-9222
PIC
Item
#517
Contact Terry
Smith,(704)385-9222, Fax (704)385-8203, email
atozprintequipmt@aol.com
Seal
N Shrink shrinkwrap, 17" x 13.5",
very popular model in excellent condition, 110V, L sealer
and heat tunnel model 1700A. $950.00 Call Terry Smith
PIC
Item
#515
Contact Terry
Smith,(704)385-9222, Fax (704)385-8203, email
atozprintequipmt@aol.com
Colly
Collator MODEL
ZTM 200/44 S/N 89138 24 stations max size 17x11 inch,
$39000us
Kugler
4 knife trimmer
SN1526-800 $0 (if sold with Colly collator)
James
Burn BB38A wire-o binding machine
s/n BB38A290F All sizes from 1/4 to 1.25
inches.$8000us
Sickinger
EP-1 automatic paper puching machine
modified to run 12x18 books , $10000us Item
#511
Contact JEAN
RHEAULT, RELIURE ALTERNATIVE INC.: 2225 CHAUVEAU AVE.,
QUEBEC CITY, CANADA G2C 1B2, Phone: 418-840-2100, Email
JRHEAULT@RELALT.COM
JWohlenberg
3 knife trimmer 44FM50,
S/N 3293-011. Multiple knifes includes, several book clamp
sizes, infeed conveyor, all included. Very good condition.
Item
#510
Contact JEAN
RHEAULT, RELIURE ALTERNATIVE INC.: 2225 CHAUVEAU AVE.,
QUEBEC CITY, CANADA, Phone: 418-840-2100, Email
JRHEAULT@RELALT.COM
Plant
Down Sizing
- Form Flo Pack
Collator, 2000, 11 or 7 inch
paper when gears changed, crimping and gluing capability.
Serial # PC 221. Model # PC 200 price $9,500,
- Autographic
Encoder,numbering (Arabic or
numeric) numbering heads available. Used for putting
numbers on checks $7,000, Hamilton
6 station collator, 11, 14 & 17"
(crimps only). No gluing capability. Crimps left &
right. $9,500,
- Nuarc Flip Top
Platemaker serial # FT26V3UPNS,
- Devotec PQ DV20
Film Processor price $1,500,
- Moore Decollator
1600 model,
- Air General 10 HP
Air Compressor/ Gray/ serial
#W041000165,
- Kellogg American
Air Compressor /Model # B3350B/
serial #V9G8086PFZI, 10 HP,
- Martin Yale 4200
Paper Jogger/ 115V/ variable
speed/ 11"x 17"/ serial # 75056,
- Ofcon Press/
1-color with perfing capability
only (some rollers removed Forklift-(web
roll) needs 4 batteries, Didde
Web miscellaneous stations
Item #508
Contact Terry
Smith,(704)385-9222, Fax (704)385-8203, email
atozprintequipmt@aol.comForklift-(web
roll) needs 4 batteries, Didde Web
miscellaneous stations
Stahl
T 50 4-4-F, pile feed with KB
52 knife fold station ser # 44008. Price $9,500
PIC
Item
#503
Contact Terry
Smith,(704)385-9222, Fax (704)385-8203, email
atozprintequipmt@aol.com
Bourg
22 bin bookletmaker
including collator, stapler, and folder with Air Assist
. (1) Wexler Binding Machine. Taking any reasonable offer
for all or part of the equipment. Item
#498
Risographs Gr 3750,
(1) Risograph Gr 3770,
(1) Parts only Gr 3750. Also have (10) Risograph Color
cylinders.
Contact Ronnie
Jensen, 727 Berryville Ave, Winchester, Va 2260, Phone:
540-323-0256
Muller
Martini Minuteman 1985,
one owner, one
shift, (6) 1516 feeders, (1) 1528 cover feeder, 3 rebuilt
stitching heads, 3 knife trimmer, belt delivery with batch
counter, 2 compressors. Price $42,000. PIC
Item
#495
Contact Terry
Smith,(704)385-9222, Fax (704)385-8203, email
atozprintequipmt@aol.com
Standard
Bindfast II hot glue binder.
Price $650.00 PIC
Item
#491
Contact Terry
Smith,(704)385-9222, Fax (704)385-8203, email
atozprintequipmt@aol.com
Muller
Martini Minute Man 1509,
Year 1988, Cover feeder 1528 L5, 6 Pockets Type 1516,
Stitcher Type 1509, 3 K Trimer, Running, available. Pictures
and video available. We can load into a truck or container.
Price: $28,000.00 LOT Item
#489
Contact: Carla
Alfaro, International Trading Services of Winter Park,
Inc., 2631 Stanmore Ct., Orlando, Florida 32817, Phone:
407-284-7824, Phone: 407-448-3988
Stahl
Folder, 20"x 26" F49 A-2. Approx
1990. Pile fed. Right angle. Under power. Good Condition. We
also have 2 single head drills, a stevenson shrinkwrapper, a
viewing booth, a gbc machine, an overhead platemaker & a
nuarc 14 x 20 camera for sale. Item
#488
Contact Jerry Pont,
Walnut Printing, Inc., 43-01 22nd St., Long Island City,
New York 11101, Phone: ( 718) 707 0100
Rosback
Semi Automatic Two Header Stitcher. Saddle
for Hand Collating - Floor Model.
Item
#487
Contact Jerry Pont,
Walnut Printing, Inc., 43-01 22nd St., Long Island City,
New York 11101, Phone: ( 718) 707 0100
Duplo
10000 S two tower air feed
collator with stitch/fold/trim/stack and
manuals. This system is missing the compressor
and the rise section. Please make offers for towers or
any major components or the full system. Call Terry
PIC
Item
#486
Contact Terry
Smith,(704)385-9222, Fax (704)385-8203, email
atozprintequipmt@aol.com
Harris
46 1/2" Magnetronic Cutter Microcut
Computer.
Cutter approx 1975-80. Good Condition. Prior owner proofing
firm. Current owner is small shop: owned since 1994.
Item
#485
Contact Jerry Pont,
Walnut Printing, Inc. : 43-01 22nd St., Long Island
City, New York 11101,
Phone: 718 -707-
0100
Baum
Folder, Model # 18 x 22.5,
Pile + Right Angle, Good condition (working), Series: 518B,
Volts 220, $800 obo. Need to get it out the door!
Item
#484
Contact: Paul
Mashburn , Easy Print Design: 3380 Viso Court , Santa
Clara, CA 95054, Phone: 408-970-9200
Stahl
TF-66 26" by 40", 1991-92,
4 Plate in Main, 4 Plate 8 page unit, 4 Plate 16 Page unit,
Henged Deflectors on all plates, Mobile Delivery, Pafa
Gluer, Gutter Trim , All sorts of score, perf wheels. Lots
of New spare parts.This is a inplant machine and has been
very well maintained and is in very good condition.
Item
#483
Contact: Bob
Bradberry, Bradberry And Associates : 1141 Fieldcrest
Lane, Madison, GA 30650, Phone: 404-543-0690
We
are liquidating the entire parts dept of Franklin Printers
Supply in Philadelphia.
Challenge, Baum, Hamada, and Duplo parts we can sell at less
than cost. Also we have an entire stock of Jomac, Botcher,
Litho Roll and Syntac rollers. Item
#482
For Example. I have
brand new two fold plates - P.N. S262 538 and 539 -BG-O1 for
sale for $450 @.New Kompac head for Hamada E47-
$1495.
Epson Stylus Pro 9880
Wide Fromat printer 44"never in production $3000. We also
have a Graphic Whizard Foldmaster 250 and a Creasemaster for
sale. These are demo room machines and have never been put
into production.
Used- We have two Baum
720 and two Baum 714 Folders with Pile feed for $4000 for
the lot. Also other used machinery available
Contact: Ed, OAD
International LLC, 2880 Comly Road, Philadelphia, PA.
19154, Telephone: + 215 671 9400, Facsimile:+ 215 671 9402,
Email: malahide@comcast.net
Mueller
Biliner 308 Newspaper Inserter
(20,000 hr) Cleaned, inspected, under power VGC,
electrical manuals, 3 into1 inserter (can do multiple
pass) 2 main jacket feeders & 1 tandem insert
feeder, includes model 310 newspaper compensating counter
stacker $55,000 loaded Call Terry
Smith 704-385-9222 PIC
Item
#480
Contact Terry
Smith,(704)385-9222, Fax (704)385-8203, email
atozprintequipmt@aol.com
Omega
Binder Saddle Stitcher Omega
Binder 6 Pockets plus 2 hand stations SN 500159 very low
mileage. 2 Hohner 55/7 F Heads, 3 Acme Heads, 2
complete sets of knives. Call Terry Smith 704-385-9222
PIC
Item
#478
Contact Terry
Smith,(704)385-9222, Fax (704)385-8203, email
atozprintequipmt@aol.com
MBO
Folder model T 49 7 44, 1984,
right angle, very nice, gap sets, combo rollers price
$16,500 call Terry PIC
Item #475
Contact Terry
Smith,(704)385-9222, Fax (704)385-8203, email
atozprintequipmt@aol.com
GBC
Genesis 8300 high speed laminator, 28"
x 40", 1999, only 3000 hrs., 200 ft. minute, ex
condition. Item
#473
Contact Terry
Smith,(704)385-9222, Fax (704)385-8203, email
atozprintequipmt@aol.com
Muller
Martini Minuteman, 1990, 4
pocket with cover feeder, trim removal system, belt delivery
and batch counter, under power, good condition. Price
$47,500 skidded and loaded. Call Terry Smith
704-385-9222 PIC
Item
#470
Contact Terry
Smith,(704)385-9222, Fax (704)385-8203, email
atozprintequipmt@aol.com
Bobst
SP 1600 E, 1974, Embossing
diecutter, previously used primarily for embossing, includes
one die chase, one embossing chase, one stripping
frame. Under power available for demo. Excellent
condition Price $115,000 PICItem
#467
Contact Terry
Smith,(704)385-9222, Fax (704)385-8203, email
atozprintequipmt@aol.com
Rosback
220 perforator.
Looks good ser # 22075135 Price $2,200.
PIC
Item
#466
Contact Terry
Smith,(704)385-9222, Fax (704)385-8203, email
atozprintequipmt@aol.com
Looking
for green model Kluge machines (guarded
as well as unguarded) for inventory. Models we buy/sell
include MD,ND,EHD,EHE,WFD,WFE. We are always looking for
inkers as well as foil stampers and we will make you a fair
offer if you are looking to sell or purchase a used machine.
We will buy machines in ANY condition. Even if your press is
locked up, in parts condition, or has simply seen better
days. You can email pictures and info to Mathew at
DandMmachinery@comcast.net, or call at (616) 260-2574.
Contact: Mathew
Hutchins, D & M Machinery, 2350 Breton industrial
Park Dr, Kentwood, Michigan 49508, Phone: (616)260-2574
Scott
RHP 7000 Reinforcer/three hole drill.
Reinforces binding edge and, if desired, also 3-hole punches
on same pass through equipment. Handles text and bond weight
stock. Size capability is from 8.5X11 through 8.5x15. Speed
is up to 7,000 per hour. Machine built in 2002. Total
running hours is LESS THAN 100. Originally paid $56,000.
Will sell for $29,500. Machine is as new. We will pay up to
$1,500 for a Scott Rep to come to buyer's location for
install. Item
#461
Contact Charles
Scott, Scott Laminating & Finishing,1801 Elm Hill
Pike, Nashville, TN 37210, Phone: ( 615
)883-4333
Complete
Bookbinding Operation. Includes:
(A) OMCOA oversewer bought completely
refurbished in 2006, (B) Jaques 33" steel top board
shear, (C) Rock City air joint creaser, (D) Meyers 17" hand
roller backer, (E) Kensol K12 Hand stamper, (F) Potdevin 32"
Type Z hot gluer, (G) Potdevin 30" rotary press, (H) Riehl
13x20 Wood Press, (I) Kwik print stamper. Being
sold as a complete package, owner no longer needs. Price
$85,000 for everything, where is USA. Call Terry Smith
704-385-9222 or email for pics. Item
#460
Contact Terry
Smith,(704)385-9222, Fax (704)385-8203, email
atozprintequipmt@aol.com
Baum
420 right angle folder, 20" x 26", electrical
counter, gap sets, combo rollers. Price $2,000.
call Terry Smith 704-385-9222 PIC
Item
#456
Contact Terry
Smith,(704)385-9222, Fax (704)385-8203, email
atozprintequipmt@aol.com
Horizon
Collator,
Model HAC-15A, Serial # 75017, Year approximate 1991, 4
Towers each with 15 bins for a total of 60, Has a PJ77
catcher. Bins are friction feed, excellent on book paper
weight as low as 27#. We purchased new and machine has seen
light use. Excellent condition Price "As Is Where Is"
$15,000.00
Wohlenberg Book
Saw, Model TS
12, Serial # 3287-004, Currently setup with a hopper feeder
but could be used inline. Very good condition with 2 new
saws for a total of 3. I do not know the year of
manufacture. Price "As Is Where Is" $12,500.00
Butler Splicers 50"
Pair, Model
1-4050-12 Serial # J6048-4LH, Model 1-4050-12 Serial #
J6048-3RH, We believe that they are 1995 models but that
would need confirmation from Butler. Excellent Condition.
Price "As Is Where Is" $38,000.00 for the pair. We
will not separate.
Butler Splicers 42"
Pair. With new
PLC Modification on both. Model MPLI-2107 Serial #
JA1505-LH, Model MPLI-2108 Serial # JA1505-RH. Excellent
Condition. Price "As Is Where Is"
$15,000.00
Butler Splicers 42"
Pair, Model
4042-10 U.W.S. Serial # 1505-1RH, Model 4042-10 U.W.S.
Serial # 1505-2LH, Can be seen running. Price "As Is Where
Is" $7,000.00
Pictures of the
equipment are on our website at www.sgprinting.net
Contact Jason Deron,
at 732-203-2251, 30 Gross Brothers Way, Waymart, Pa 18472,
Tele: 570-488-5000, Fax: 570-488-6272, Direct Line:
732-203-2251, www.sgprinting.net
Complete
Printing Facility for Sale: Owner
Retiring. Multigraphics 3650 press, fully automated with
chain delivery. Max sheet 12 3/4" x 18 1/8", Kompac
dampener, auto plate insert and eject, auto blanket wash and
count down keypad. Designed to be converted easily to 2
color press if desired. Powder spray, in storage last 4
years, excellent condition, VERY LOW total impressions
(bought new in 1997) well maintained. Operators manual
included. $2500.00 OBO.
Multigraphics 1250
press, good condition, in storage last 4 years, Orange
model, $500.00 OBO.
Multigraphic 60 bin
Vertical tower collator (Where space is a concern). Handles
up to 11" x 17" Can be operated as stand alone or interfaced
to the press for automatic collation. Max 24,000 sheets per
hour. Operators manual included. $1,000 OBO.
Challenge single head
drill, good condition. $750.00 OBO.
Purchase all for
$4000.00. Buyer responsible for all shipping and crating.
All equipment in Mid West U.S. Item
#454
Contact Roger D.
Lloyd, Phone 480-699-8603, Email rogerdlloyd@yahoo.com
CHALLENGE
305 MC (set
paper size manually), Serial # 11296, 208/220 volt, single
phase, comes with tables. You pick up in Central Florida.
$5000 OBO. Item
#861
Contact: Ken
Baker, B & B Printing, Inc., 23918 State Road 46,
Sorrento, Florida 32776, Phone:
352-735-5522
Challenge
305 MPC
30 1/2 inch cutter, approx 1987,
ser# 11287, 99 channel, power backguage, 220v 3 ph., Price
$6,900 Call Terry Smith 704-385-9222 PIC
Item
#860
Contact Terry
Smith,(704)385-9222, Fax (704)385-8203, email
atozprintequipmt@aol.com
26-1K
is a table top plate burner.
works fine but will need glass replaced. First 150.00
PICS
Item
#859
Challenge Paper
cutter. 18" 110Volt with extra
cutting sticks and extra knife. cuts very good just have
larger cutter on floor already. First 1000.00
Contact John Lusby,
Custom Print Shop, Phone 863-668-5692, Email
cprint@gate.net
Bobst
SP 1600 E, 1976, 63" x 43
7/8", Under power. Price $65,000 PIC
Item
#858
Contact Terry
Smith,(704)385-9222, Fax (704)385-8203, email
atozprintequipmt@aol.com
Bobst
SP 1650 E, 1970, Under
power Price $29,000 PICItem
#857
Contact Terry
Smith,(704)385-9222, Fax (704)385-8203, email
atozprintequipmt@aol.com
GBR
Multimaster CAS 52 folder, 20x26,
Programmed
job memory, Automatic fold plate setting, continuous
feed, 8 page section, low mileage, purchased new in 2002.
Like new. We are a large sheet fed printer and
have not had enough usage of this machine.
$30,000
Contact Jay
Nelson, Precision Graphics Inc., 2525 Fernbrook Lane,
Plymouth, MN 55447, Phone: (763) 476 - 4100, Email
jay.n@pgiprint.com
Shrink
wrap High speed 22" x 8".
Includes: Signature Packaging HK 2020-SI hot knife L-sealer
and 2412-S-TM shrink tunnel. Power film unwind. Up to
25 packages per minute. Price
$17,500 price
reduced to $13,500
PIC
Item
#851
Contact Terry
Smith,(704)385-9222, Fax (704)385-8203, email
atozprintequipmt@aol.com
Pro
Pack Shrink wrap system with
fully automated L-Sealer and SM-4525 heat tunnel.
Purchased September 2005. Seldom used. Under
power. Price $19,000 PIC
Item
#849
Contact Terry
Smith,(704)385-9222, Fax (704)385-8203, email
atozprintequipmt@aol.com
Cratherns
models 2436 and
2540 (2) machines one is
wrapping line with gluer, spotter, wrapper. 2nd
machine is lining line with gluer, spotter, and pot devin
compression rolls email or call for pictures and
price. Machines are disassembled. Call Terry
Smith 704-385-9222 PIC
Item
#848
Contact Terry
Smith,(704)385-9222, Fax (704)385-8203, email
atozprintequipmt@aol.com
Sterling
high-speed Automatic plastic strapping
machine. 22 rolls of
welded plastic strapping included. Primarily used by
newspaper mailrooms and publication printers. Price
$call PIC
Item
#846
Contact Terry
Smith,(704)385-9222, Fax (704)385-8203, email
atozprintequipmt@aol.com
|